Mobile Plate Dispenser, NSF, Convection Heated, Three Stack for 7 to 10-1/4 Inch Round Plates

$18,399.00

Convected air plate dispensers provide even heat distribution to ensure faster, more consistent, and efficient plate heating. The Lakeside 7512 Mobile Plate Dispenser is a three-stack convection heated NSF dispenser that holds 7 to 10-1/4 inch round plates. Even heat transfer to all plates helps the plates maintain safe food temperatures. The unique lid design holds in heat without gaskets, helping plates maintain heat. This model’s dispenser cabinet is fully insulated to conserve energy. Single heat control for 3 dispensers in a single compartment. Dispensers are self-lubricating for smooth, accident-free operation without maintenance. Self-leveling dispenser units are removable for convenient cleaning and tension adjustment. This unit’s push handle gives more control during transportation. All 5” swivel casters, 2 with brake, allow easy maneuverability. The stainless steel construction increases durability, and is easy to clean and sanitize. Each dispenser accommodates a 27” stack of plates with a diameter of 7 to 10 1⁄4 inch. Nobody beats Lakeside’s lead times. Made in the USA.

Specifications

PRODUCT INFORMATION
Electrical Amps

16.3

Heating

Convection Heated

Electrical Hertz

60Hz

Electrical Volts

208VAC, 220VAC

Electrical Watts

3200

NSF

Yes

country-of-origin

US

Adjust-a-Fit

Yes

Country of Origin

US

Dish Shape

Round

Number of Stacks

3

Body Style

Cabinet

Plate Size Range

7 to 10 1/4

Caster Size (in)

5

Caster Type

All-Swivel 2 Ea. w/Brake

Item Length x Width x Height (in) 43.44 in x 23.75 in x 42.75 in
Item Weight 1 lbs
Specification Sheet View the 7512 specification sheet
SHIPPING DIMENSIONS
Weight 300 lbs 136.08 kgs
Dimensions (LxWxH) 46 in x 26 in x 45 in 116.84 cm x 66.04 x cm 114.3 cm
Print Friendly, PDF & Email

Specification

CABINET: Exterior shall be constructed on 18-gauge 300 Series stainless steel. Inner wall of cabinet shall be constructed of .063 high-strength aluminum. All sides and top of cabinet shall be insulated with fiberglass for heat retention and energy efficiency. Cabinet lids shall feature hat channel design that does not require a gasket. The heating system shall be thermostatically controlled, using forced air with a 3200-watt element to heat the cabinet interior compartment. Unit shall be 208/220 VAC, 60 Hz and shall feature a 6´ (1829 mm) long 20 amp power cord with NEMA 6-20P plug. Cabinet shall be mounted on four 5” extra-load swivel casters (two with brake) with non-marking cushion tread wheel. Unit shall be UL and NSF listed.
DISPENSERS: Self-leveling dispensers shall be constructed of stainless steel with self-lubricating bearings that ride over vertical guide rods to prevent carriage binding. Self-leveling tension shall be adjusted without tools by hooking or unhooking tension springs from the carriage. Carriage shall have a vertical movement of 24” (610 mm), and shall accommodate a 27” (686 mm) high stack of plates that are between 7” and 10-1/4” in diameter. Dispensers shall feature lift-out handles for easy removal from cabinet for cleaning
and adjustment.

  • Even heat transfer to all plates helps plates maintain safe food temperatures.
  • Unique lid design holds in heat without gaskets, helping plates maintain heat.
  • Dispenser cabinet is fully insulated to conserve energy.
  • Single heat control for 3 dispensers in a single compartment.
  • Dispensers are self-lubricating for smooth, accident-free operation without maintenance.
  • Self-leveling dispenser units are removable for convenient cleaning and tension adjustment.
  • Push handle for more control during transportation.
  • All 5” swivel casters, 2 with brake, allow easy maneuverability.
  • Stainless steel construction increases durability, and is easy to clean and sanitize.
  • Each dispenser accommodates a 27” stack of plates with a diameter of 7 to 10 1⁄4”.