Lakeside S6009 Drop In Plate Dispenser, Shielded, Heated for 8-1/2 to 9-1/4 Inch Square Plates

$3,033.00

Lakeside S6009 Drop In Plate Dispenser, Shielded, Heated for 8-1/2 to 9-1/4 Inch Square Plates provides a unique fit for your modern-shaped plates. Heated and shielded to protect against contaminates and plate chipping, accommodates 8-1/2″ to 9-1/4″ (216 to 235) square shaped dish sizes. Self-Leveling Dispensers: Adjusting height level is easy and convenient. Simply detach and attach springs as needed with no tools required. The Easy-Glide™ design dispenses plates smoothly while preventing jams. Heated with adjustable thermostatic control to maintain food safe temperatures (thermostat min- 100° F, max- 175° F). Stainless steel material is durable and easy to clean and sanitize. Self-leveling dispensers have a 25”(635) stacking height capacity. Square dish dispensers accommodate a variety of 8-1/2 to 9-1/4 inch dish sizes, including plates and bowls. Made in the USA.

Specifications

PRODUCT INFORMATION
Heating

Heated

Electrical Amps

3.8

Electrical Hertz

60Hz

Electrical Volts

120VAC

Electrical Watts

450

NSF

Yes

country-of-origin

US

Adjust-a-Fit

No

Country of Origin

US

Dish Shape

Square

Plate Size Range

8 1/2 to 9 1/4

Dispense Height

Standard

Item Length x Width x Height (in) 12.5 in x 12.5 in x 31 in
Specification Sheet View the S6009 specification sheet
SHIPPING DIMENSIONS
Weight 26 lbs 11.79 kgs
Dimensions (LxWxH) 18.75 in x 18.75 in x 34 in 47.63 cm x 47.63 x cm 86.36 cm
Print Friendly, PDF & Email

Specification

Unit shall be of welded stainless steel construction to dispense square dishes. Dispensers shall hang from surface opening by a 14-gauge flange rim and feature four each 18-gauge vertical corner supports welded to 18-gauge bottom plate. Self-leveling dish carriage shall be of welded stainless steel construction and shall travel vertically in dispenser tube with nylon roller guides for smooth operation. Carriage shall have 20-gauge removable dish platform. Unit shall feature flange mounted extension springs on two sides, which are detachable from the dish carriage to provide adjustment without tools for different weight dishes. Unit shall have a vertical stacking capacity of 25″ (635 mm). Shielded and heated models shall have a 24-gauge skin enclosure. Unit shall be NSF listed.

Heated Models Only: Unit shall be 120 VAC 60 Hz and shall have 5´ (1524 mm) power supply cable with L15-5R NEMA twist lock plug for 120 VAC. Dispenser tubes shall be fully enclosed in 24-gauge stainless steel, and have a circular bottom mounted 450 watt heater element to provide convection heat. Heating system shall feature thermostatic control in a tamper protective location with safe high-end shut-off. Control shall have infinite settings between low and high temperature cut-outs. Thermostat shall be field adjustable for average interior air temperature between 100° F (38° C) and 175° F (79° C) at middle adjustable thermostatic setting. On-off switch and power indicator light shall be mounted on top flange of dispenser. Average dish temperature rise of 40° F (22° C) above ambient shall be achieved within one hour of initial heating cycle at middle adjustable thermostatic setting. Unit shall be UL listed.

  • Heated and shielded to protect against contaminates and plate chipping, accommodates 8-1/2″ to 9-1/4″ (216 to 235) square shaped dish sizes
  • Self-Leveling Dispensers: Adjusting height level is easy and convenient. Simply detach and attach springs as needed with no tools required
  • The Easy-Glide™ design dispenses plates smoothly while preventing jams.
  • Heated with adjustable thermostatic control to maintain food safe temperatures (thermostat min- 100° F, max- 175° F)
  • Stainless steel material is durable and easy to clean and sanitize
  • Self-leveling dispensers have a 25”(635) stacking height capacity.
  • Square dish dispensers accommodate a variety of 8-1/2 to 9-1/4 inch dish sizes, including plates and bowls.
  • Made in the USA