Lakeside 172 Standard Sheet Pan Rack with 5″ Recessed Plate Casters, Stainless Steel, NSF, Angle Ledges with 3″ Spacing for 18 Full Size Pans

$2,730.00

Durability and storage efficiency will have you relying on these racks for years! The Lakeside 172 Sheet Pan Rack has a 18 full-size pan capacity and angle style ledges with 3″ spacing. The angle style ledges are welded to the uprights to withstand continual use, tie bars are also welded to the uprights for added integrity. This unit has 5-inch all swivel, recessed plate mount casters for upright stability and increased maneuverability. All-welded stainless steel construction is easy to clean and sanitize and provides longer life. Ships fully assembled for immediate use right out of the carton, made in the USA. Choose an angle style ledge when your pans are slightly smaller than 18″ (457).

Specifications

PRODUCT INFORMATION
Material

Stainless Steel

NSF

Yes

Pan Capacity

18

Country of Origin

US

Ledge Type

Angle

Ledge Spacing (in)

3

Caster Size (in)

5

Caster Type

All swivel, Recessed

Item Length x Width x Height (in) 26.25 in x 21 in x 62.13 in
Specification Sheet View the 172 specification sheet
SHIPPING DIMENSIONS
Weight 79 lbs 35.83 kgs
Dimensions (LxWxH) 29 in x 21.5 in x 66 in 73.66 cm x 54.61 x cm 167.64 cm
Print Friendly, PDF & Email

Specification

Unit shall be of all-welded construction and shall accommodate 18” x 26” (457 x 660 mm) pans or 14” x 18” (356 x 457 mm) pans and trays. Corner upright legs and top and bottom frame shall be of .104 x 3/4” x 1-1/4” angle stainless steel. Pan/tray ledges shall be of 16-gauge stainless steel and shall be welded to upright legs front and back. Top and bottom corner frame joints shall have 16-gauge reinforcing gussets welded in place for extra rigidity. Unit shall have a 16-gauge 1/2” x 1/2” angle stainless steel horizontal brace welded to upright legs at open ends front and back. Casters shall be 5” (127 mm) diameter swivel stem type, mounted to corner legs for upright stability. Unit shall be NSF listed.

  • Angle style ledges are welded to the uprights to withstand continual use, tie bars are also welded to the uprights for added integrity.
  • Angle style ledges are 1-5/16″ Wide with 3″ Spacing for 18 Full Size/36 Half Size Sheet Pans.
  • All-welded stainless steel construction is easy to clean and sanitize and provides longer life.
  • 5″ all swivel recessed plate casters for maneuvering in tight spaces.
  • Ships fully assembled, made in the USA.
  • Choose an angle style ledge when your pans are slightly smaller than 18″ (457).
  • Narrow Opening